The Med Aire Bariatric Low Air Loss Mattress Replacement System by Drive Medical is perfect for people looking for alternating pressure for Bariatric people. The alternating pressure system is optimized for pressure redistribution for people with up to Stage IV pressure ulcer, and thus was designed to prevent, treat, and manage pressure ulcers in a home, long term care, or acute care setting. The cell-on-cell design of 10″ deep air cells prevents “bottoming out” which is when the patient would sink to the bottom of the mattress. The Med Aire Bariatric Low Air Loss Mattress even provides an additional 24 hours of use in the event of a power outage. The advanced digital pump allows for a custom setting which allows the individual to set the unit to his comfort and safety needs, and will even auto return to a alternating pressure mode if the system is left on static mode for more than 2 hours. The convenient cover stretches 4 ways, is low sheer, fluid resistant, vapor permeable, quilted and zippered. In the unlikely event that one of the 20 air cells malfunction due to a puncture, they are easily removed and replaced. The unit also has a pillow function allowing 3 air cells at the head of the bed to stay in a static mode for better comfort and easier sleep. The system has 3 distinct diagnostic alarms which tell you whether the problem is with the mattress or the pump allowing for easy and effective troubleshooting. Be sure to consider the Med Aire Bariatric Low Air Loss Mattress Replacement System for effective treatment and ideal comfort.

• This combination therapy bariatric system provides both alternating pressure and low air loss to optimize pressure redistribution and manage skin maceration
• Cell-on-cell design of 10″ deep air cells prevents “bottoming out” and also provides up to 24 hours of power outage protection
• Digital pump allows for customization to individual patients’ comfort and safety needs, and will auto-return to alternating pressure mode if system is left on static mode for more than 2 hours
• Low air loss holes in the central 9 bladders beneath the trunk and pelvis wick away moisture and humidity providing improved microclimate control
• 4-way stretch cover is low sheer, fluid-resistant, vapor permeable, quilted and zippered
• Each one of the 20, 10″ deep air bladders are easily removed and replaced
• Pillow function maintains the 3 air cells at the head of the bed in static mode for patient comfort
• 3 diagnostic alarms tell you whether a problem is with the mattress or the pump for more efficient servicing
• CPR valve allows for rapid deflation

• Actual Product Weight: 36 lbs
• Cover Material: Fluid Resistant Stretch
• Overall Product Height: 10″
• Overall Product Length: 80″
• Overall Product Width: 42″
• Primary Product Color: Blue
• Primary Product Material: Nylon and PU
• Product Weight Capacity: 600 lbs
• Pump Airflow: 12 LPM
• Pump Alarms: Visual/Audible
• Pump Cycle Time: 10, 15, 20, 25 Minutes
• Pump Power: 110 VAC 60 Hz
• Pump Type: Compressor
• Warranty: 18 Month Limited

The Med Aire Bariatric Low Air Loss Mattress Replacement System by Drive Medical is perfect for people looking for alternating pressure for Bariatric people. The alternating pressure system is optimized for pressure redistribution for people with up to Stage IV pressure ulcer, and thus was designed to prevent, treat, and manage pressure ulcers in a home, long term care, or acute care setting. The cell-on-cell design of 10″ deep air cells prevents “bottoming out” which is when the patient would sink to the bottom of the mattress. The Med Aire Bariatric Low Air Loss Mattress even provides an additional 24 hours of use in the event of a power outage. The advanced digital pump allows for a custom setting which allows the individual to set the unit to his comfort and safety needs, and will even auto return to a alternating pressure mode if the system is left on static mode for more than 2 hours. The convenient cover stretches 4 ways, is low sheer, fluid resistant, vapor permeable, quilted and zippered. In the unlikely event that one of the 20 air cells malfunction due to a puncture, they are easily removed and replaced. The unit also has a pillow function allowing 3 air cells at the head of the bed to stay in a static mode for better comfort and easier sleep. The system has 3 distinct diagnostic alarms which tell you whether the problem is with the mattress or the pump allowing for easy and effective troubleshooting. Be sure to consider the Med Aire Bariatric Low Air Loss Mattress Replacement System for effective treatment and ideal comfort.

• This combination therapy bariatric system provides both alternating pressure and low air loss to optimize pressure redistribution and manage skin maceration
• Cell-on-cell design of 10″ deep air cells prevents “bottoming out” and also provides up to 24 hours of power outage protection
• Digital pump allows for customization to individual patients’ comfort and safety needs, and will auto-return to alternating pressure mode if system is left on static mode for more than 2 hours
• Low air loss holes in the central 9 bladders beneath the trunk and pelvis wick away moisture and humidity providing improved microclimate control
• 4-way stretch cover is low sheer, fluid-resistant, vapor permeable, quilted and zippered
• Each one of the 20, 10″ deep air bladders are easily removed and replaced
• Pillow function maintains the 3 air cells at the head of the bed in static mode for patient comfort
• 3 diagnostic alarms tell you whether a problem is with the mattress or the pump for more efficient servicing
• CPR valve allows for rapid deflation

• Actual Product Weight: 40 lbs
• Cover Material: Fluid Resistant Stretch
• Overall Product Height: 10″
• Overall Product Length: 80″
• Overall Product Width: 48″
• Primary Product Color: Blue
• Primary Product Material: Nylon and PU
• Product Weight Capacity: 750 lbs
• Pump Airflow: 12 LPM
• Pump Alarms: Visual/Audible
• Pump Cycle Time: 10, 15, 20, 25 Minutes
• Pump Power: 110 VAC 60 Hz
• Pump Type: Compressor
• Warranty: 18 Month Limited

The Med Aire Bariatric Low Air Loss Mattress Replacement System by Drive Medical is perfect for people looking for alternating pressure for Bariatric people. The alternating pressure system is optimized for pressure redistribution for people with up to Stage IV pressure ulcer, and thus was designed to prevent, treat, and manage pressure ulcers in a home, long term care, or acute care setting. The cell-on-cell design of 10″ deep air cells prevents “bottoming out” which is when the patient would sink to the bottom of the mattress. The Med Aire Bariatric Low Air Loss Mattress even provides an additional 24 hours of use in the event of a power outage. The advanced digital pump allows for a custom setting which allows the individual to set the unit to his comfort and safety needs, and will even auto return to a alternating pressure mode if the system is left on static mode for more than 2 hours. The convenient cover stretches 4 ways, is low sheer, fluid resistant, vapor permeable, quilted and zippered. In the unlikely event that one of the 20 air cells malfunction due to a puncture, they are easily removed and replaced. The unit also has a pillow function allowing 3 air cells at the head of the bed to stay in a static mode for better comfort and easier sleep. The system has 3 distinct diagnostic alarms which tell you whether the problem is with the mattress or the pump allowing for easy and effective troubleshooting. Be sure to consider the Med Aire Bariatric Low Air Loss Mattress Replacement System for effective treatment and ideal comfort.

• This combination therapy bariatric system provides both alternating pressure and low air loss to optimize pressure redistribution and manage skin maceration
• Cell-on-cell design of 10″ deep air cells prevents “bottoming out” and also provides up to 24 hours of power outage protection
• Digital pump allows for customization to individual patients’ comfort and safety needs, and will auto-return to alternating pressure mode if system is left on static mode for more than 2 hours
• Low air loss holes in the central 9 bladders beneath the trunk and pelvis wick away moisture and humidity providing improved microclimate control
• 4-way stretch cover is low sheer, fluid-resistant, vapor permeable, quilted and zippered
• Each one of the 20, 10″ deep air bladders are easily removed and replaced
• Pillow function maintains the 3 air cells at the head of the bed in static mode for patient comfort
• 3 diagnostic alarms tell you whether a problem is with the mattress or the pump for more efficient servicing
• CPR valve allows for rapid deflation

• Actual Product Weight: 40 lbs
• Cover Material: Fluid Resistant Stretch
• Overall Product Height: 10″
• Overall Product Length: 80″
• Overall Product Width: 54″
• Primary Product Color: Blue
• Primary Product Material: Nylon and PU
• Product Weight Capacity: 1000 lbs
• Pump Airflow: 12 LPM
• Pump Alarms: Visual/Audible
• Pump Cycle Time: 10, 15, 20, 25 Minutes
• Pump Power: 110 VAC 60 Hz
• Pump Type: Compressor
• Warranty: 18 Month Limited

The Med Aire Bariatric Low Air Loss Mattress Replacement System by Drive Medical is perfect for people looking for alternating pressure for Bariatric people. The alternating pressure system is optimized for pressure redistribution for people with up to Stage IV pressure ulcer, and thus was designed to prevent, treat, and manage pressure ulcers in a home, long term care, or acute care setting. The cell-on-cell design of 10″ deep air cells prevents “bottoming out” which is when the patient would sink to the bottom of the mattress. The Med Aire Bariatric Low Air Loss Mattress even provides an additional 24 hours of use in the event of a power outage. The advanced digital pump allows for a custom setting which allows the individual to set the unit to his comfort and safety needs, and will even auto return to a alternating pressure mode if the system is left on static mode for more than 2 hours. The convenient cover stretches 4 ways, is low sheer, fluid resistant, vapor permeable, quilted and zippered. In the unlikely event that one of the 20 air cells malfunctions due to a puncture, they are easily removed and replaced. The unit also has a pillow function allowing 3 air cells at the head of the bed to stay in a static mode for better comfort and easier sleep. The system has 3 distinct diagnostic alarms which tell you whether the problem is with the mattress or the pump allowing for easy and effective troubleshooting. Be sure to consider the Med Aire Bariatric Low Air Loss Mattress Replacement System for effective treatment and ideal comfort.

• This combination therapy bariatric system provides both alternating pressure and low air loss to optimize pressure redistribution and manage skin maceration
• Cell-on-cell design of 10″ deep air cells prevents “bottoming out” and also provides up to 24 hours of power outage protection
• Digital pump allows for customization to individual patients’ comfort and safety needs, and will auto-return to alternating pressure mode if system is left on static mode for more than 2 hours
• Low air loss holes in the central 9 bladders beneath the trunk and pelvis wick away moisture and humidity providing improved microclimate control
• 4-way stretch cover is low sheer, fluid-resistant, vapor permeable, quilted and zippered
• Each one of the 20, 10″ deep air bladders are easily removed and replaced
• Pillow function maintains the 3 air cells at the head of the bed in static mode for patient comfort
• 3 diagnostic alarms tell you whether a problem is with the mattress or the pump for more efficient servicing
• CPR valve allows for rapid deflation

• Actual Product Weight: 35 lbs
• Cover Material: Fluid Resistant Stretch
• Overall Product Height: 10″
• Overall Product Length: 80″
• Overall Product Width: 60″
• Primary Product Color: Blue
• Primary Product Material: Nylon and PU
• Product Weight Capacity: 1000 lbs
• Pump Airflow: 12 LPM
• Pump Alarms: Visual/Audible
• Pump Cycle Time: 10, 15, 20, 25 Minutes
• Pump Power: 110 VAC 60 Hz
• Pump Type: Compressor
• Warranty: 18 Month Limited

The Balanced Aire Self Adjusting foam/air mattress from Drive and Mason Medical provides excellent patient comfort as a powered, air-filled support surface. Providing the patient with the proper support they want and need while aiding in the prevention of pressure ulcers. The Balanced Aire’s foam-filled air cells are arranged into three separate zones and are covered by two types of foam for ideal comfort. Plus, the alternating pressure pump converts the Balanced Aire to a dynamic powered system for even greater pressure redistribution and improved circulation.

• Add an alternating pressure pump and the BalancedAire easily converts to a dynamic powered system for additional pressure redistribution
• In addition, the system is sloped downward in the foot section to reduce pressure in the heel zone
• Meets Federal Fire Code CFR 16 part 1633
• The (12) 5.5″ tri-laminated foam filled air cells are separated into three distinct pressure zones, each zone independently self-adjusting to the patient’s needs
• The Balanced Aire mattress replacement is a powered support surface
• The air cells are contained within a high density foam perimeter which creates a smooth transition from the side rail to the air cell

• Actual Product Weight: 52 lbs
• Cover Material: Fluid Resistant Stretch
• Overall Product Height: 7″
• Overall Product Length: 80″
• Overall Product Width: 35″
• Primary Product Color: Blue
• Primary Product Material: Nylon
• Product Weight Capacity: 500 lbs
• Pump Airflow: 5 LPM
• Pump Cycle Time: 10 Minutes
• Pump Power: 110 VAC 60 Hz
• Pump Type: Compressor
• Warranty: 1 Year Limited

The Balanced Aire Self Adjusting foam/air mattress from Drive and Mason Medical provides excellent patient comfort with an air-filled support surface. Providing the patient with the proper support they want and need while aiding in the prevention of pressure ulcers. The Balanced Aire’s foam-filled air cells are arranged into three separate zones and are covered by two types of foam for ideal comfort.

• The 12, 5.5″ tri-laminated foam filled air cells are separated into three distinct pressure zones, each zone independently self-adjusting to the patient’s needs
• The air cells are contained within a high density foam perimeter which creates a smooth transition from the side rail to the air cell
• The foot section is sloped downward to reduce pressure in the heel zone
• Add an alternating pressure pump and the Balanced Aire easily converts to a dynamic powered system for additional pressure redistribution
• Meets Federal Fire Code CFR 16 part 1633

• Actual Product Weight: 46.8 lbs
• Cover Material: Fluid Resistant Stretch
• Overall Product Height: 7″
• Overall Product Length: 80″
• Overall Product Width: 54″
• Primary Product Color: Blue
• Primary Product Material: Nylon
• Product Weight Capacity: 650 lbs
• Warranty: 1 Year Limited

The Balanced Aire Self Adjusting foam/air mattress from Drive and Mason Medical provides excellent patient comfort with an air-filled support surface. Providing the patient with the proper support they want and need while aiding in the prevention of pressure ulcers. The Balanced Aire’s foam-filled air cells are arranged into three separate zones and are covered by two types of foam for ideal comfort.

• The 12, 5.5″ tri-laminated foam filled air cells are separated into three distinct pressure zones, each zone independently self-adjusting to the patient’s needs
• The air cells are contained within a high density foam perimeter which creates a smooth transition from the side rail to the air cell
• The foot section is sloped downward to reduce pressure in the heel zone
• Add an alternating pressure pump and the Balanced Aire easily converts to a dynamic powered system for additional pressure redistribution
• Meets Federal Fire Code CFR 16 part 1633

• Actual Product Weight: 46.8 lbs
• Cover Material: Fluid Resistant Stretch
• Overall Product Height: 7″
• Overall Product Length: 80″
• Overall Product Width: 35″
• Primary Product Color: Blue
• Primary Product Material: Nylon
• Product Weight Capacity: 500 lbs
• Warranty: 1 Year Limited

A Lateral Rotation Mattress System from Drive and Mason Medical aids patients who are at risk for circulation problems and pressure ulcers. With the LS9500, the turning, moving and shifting of the patient is done by the mattress itself with the option of 10 comfort levels, adjustable turning cycles and angle adjustment of up to 40 degrees. The LS9500 can also operate with an “on demand” low air loss function to provide an aerated, cool, dry sleeping surface for maximum patient comfort.

• Turn-Style system incorporates the functions of lateral rotation and low air loss in one unit
• The user friendly high flow control unit offers 10 comfort levels, adjustable turning cycles, and maximum turn angle adjustment of up to 40-degrees
• The continuous feedback sensor technology of the control unit will equalize pressure and maximize patient comfort
• The mattress is constructed of 20, 8″ high split-air cells over a 2″ foam base with 2, 10″ high side air bolsters
• The lateral rotation mode will assist in pulmonary blood flow and mucosal drainage, while the “on-demand” low air loss function will provide a cool and dry surface for prevention and treatment of pressure ulcers
• The side bolsters provide the patient with optimal comfort while creating a safe environment during rotation
• 10, 20, 30, and 60 minute adjustable turning cycles
• 1/4, 1/2, 3/4, and full position adjustable turning positions up to 40-degrees
• Lockout feature to protect patient settings
• Auto-Firm feature for max inflation when transferring patient and has auto-recovery after 30 minutes
• Audible and visual low pressure alarms
• CPR deflation in 20 seconds

• Actual Product Weight: 45 lbs
• Cover Material: Fluid Resistant Nylon
• Overall Product Height: 10″
• Overall Product Length: 80″
• Overall Product Width: 36″
• Primary Product Color: Blue
• Primary Product Material: Fluid Resistant Nylon
• Product Weight Capacity: 500 lbs
• Pump Airflow: 45 LPM
• Pump Alarms: Visual/Audible
• Pump Power: 110 VAC 60 Hz
• Pump Type: Compressor
• Warranty: 1 Year Limited

A Low Air Loss mattress system from Drive and Mason Medical helps to prevent and treat pressure ulcers by providing the patient with an aerated, dry sleeping surface. The LS9000 offers superior air flow for a cool and dry sleeping surface. It also includes Mason’s exclusive Pulsate mode that intermittently reduces the mattress’s air pressure to aid in increasing blood flow. The unit’s internal pressure monitor continuously adjusts for optimal pressure redistribution.

• Extraordinary therapeutic mattress system for the prevention and treatment of pressure ulcers
• The Powerloft Pro 900 pump produces 1180 liters of air flow per minute offering a cool and dry sleeping surface
• The 10 Adjustable Comfort Settings allows pressure to be customized by patient’s weight
• The Auto-Firm feature allows for a 1 minute fill rate
• The exclusive Pulsate mode reduces the air flow every 30 seconds to 50-percent of the comfort setting; This feature will intermittently reduce pressure and increase blood flow
• The internal pressure control sensor continuously monitors surface pressure for optimal pressure redistribution
• For use in the Homecare, Long Term Care, and Acute Care Markets
• 2″ convoluted foam base in case of power outage
• Static function can suspend the pulsate mode
• Visible and audible alarms with Alarm Mute feature
• CPR valve allows for rapid deflation

• Actual Product Weight: 33.6 lbs
• Cover Material: Fluid Resistant Nylon
• Overall Product Height: 10″
• Overall Product Length: 80″
• Overall Product Width: 36″
• Primary Product Color: Blue
• Primary Product Material: Fluid Resistant Nylon
• Product Weight Capacity: 1000 lbs
• Pump Airflow: 1180 LPM
• Pump Alarms: Visual/Audible
• Pump Cycle Time: 30 Second Pulsation
• Pump Power: 110VAC 60 Hz
• Pump Type: Blower
• Warranty: 1 Year Limited

The Med Aire 8″ Alternating Pressure and Low Air Loss mattress replacement system is indicated for the prevention and treatment of all stages of pressure ulcers. This feature rich Group 2 Support Surface offers alternating pressure therapy and microclimate control optimizing pressure redistribution and helping to maintain skin integrity. An intuitive 8 LPM (liters per minute) control unit provides 4 cycle time options, auto-recovery, seat inflation, micro processing feedback, 3 diagnostic alarms, and comfort settings easily adaptable to the patient’s specific needs. Designed to administer alternating pressure and low air loss therapy, this mattress has head to toe durable air cells with pillow function for comfort, cell on cell technology for power outage protection, and a low shear, anti-friction, fluid resistant durable stretch cover.

• This combination therapy system provides both alternating pressure and low air loss to optimize pressure redistribution and manage skin maceration
• Designed to prevent, treat and manage pressure ulcers in the home, long term care, or acute care setting
• Cell-on-cell design of 8″ deep air cells prevents “bottoming out” and also provides up to 24 hours of power outage protection
• Advanced Clinical and Care Giver Features: Auto-Firm, Seat Inflate, auto-recovery, micro processing feedback, lock-out and more
• Digital pump allows for customization to individual patients’ comfort and safety needs, and will auto return to alternating pressure mode if system is left on static mode for >2 hours
• Deluxe 4-way stretch cover is low shear, fluid-resistant, vapor permeable, quilted and zippered
• Each one of the 20, 8″ deep air bladders are easily removed and replaced via quick disconnects
• Pillow function maintains the 3 air cells at the head of the bed in static mode for patient comfort
• 3 diagnostic alarms tell you whether a problem is with the mattress or the pump for more efficient servicing
• CPR valve allows for rapid deflation
• CFR 1632 fire rating

• Actual Product Weight: 27.9 lbs
• Cover Material: Fluid Resistant Stretch
• Overall Product Height: 8″
• Overall Product Length: 84″
• Overall Product Width: 36″
• Primary Product Color: Blue
• Primary Product Material: Nylon and PU
• Product Weight Capacity: 450 lbs
• Pump Airflow: 8 LPM
• Pump Alarms: Visual/Audible
• Pump Cycle Time: 10, 15, 20, 25 Minutes
• Pump Power: 110VAC 60 Hz
• Pump Type: Compressor
• Warranty: 18 Month Limited